Sony Android Screens

Option 1, manual configuration
* Accept all questions, and press next until homepage appears
* Do NOT log in with any Google Account
* Make sure you have the latest firmware, Settings - System - About - System Software update
- Should be Android >=12, version>=6.8112
* Install our software the normal way, (click build 7 times, enable USB-debug....install VAPlayer app)
* Goto Settings
- Display - Light Sensor off
- Network and Internet - Local Network setup - IPControl
- Remote Device settings - on
- Change to normal+preshared key
- Enter presharded key "8888" for never screens "8888_8888_8888", try only 8888 first
- Simpel IP Control - Enabled
- Power and Energy
- Turn off display after: Never
- Power saving: Off
- Cast = Never
- Apple & Homekit = Airplay: Off
* Start Pro settings app
* Pro settings
- AC Power On - Always
- Wake-Up Signal - Always enabled
- Charge USB during Standbymode - Enable
- Allow App - VAPlayerWeb allowed
* Change to Pro Mode in the Pro app
* Reboot (by unplug/replug power)
* VAPlayer will start

If you need to exit Pro mode, i+, mute, vol+, home


Option 2, use RDM Tool from Sony
Almost all settings can be set using this tool, "denisty" needs to set manually after this see below..
See Sony RDM manual here if needed
Display needs to have Android >=10, version 6.7283 (released in August 2024)
- If lower Settings - System - About - System Software update, should then be Android 12, do factory reset again
Login to Sony "Remote Device Manager" https://apps.rdm.sony.net
RDM - Device registration - Individial registration - register with serial number or mac address - chose Profile VAPlayer
On display - Do not select languange on the Screen, wait for a code to be visible...if you have bypassed select language, do a factory reset, see bottom of page
RDM Provisioning - Enter the code on the screen - Provision will start, takes around 5-10 minutes!
When our application starts
- A message with "Fix Density" is showed, press this button, (this will automatically close after 2 minutes)
- A dialogbox appears, press "Allow",
- Wait for around 30 seconds and the screen will reboot and density will be correct.
If this do not work, see normal Android Option 1 and use Windows program to change the density only


If you need to factory reset screen
Hold power button + power on until "Erasing" is showing on screen